RaspberryPiにインストールしていたSoftEtherをアップデートする

2021年08月16日に公開された「2021/08/16 日本の広範囲のグローバル IP の IPsec VPN 装置宛へのサイバー攻撃の注意喚起と「SoftEther VPN」/「PacketiX VPN」への影響を防ぐための設定の確認のお願い・新ビルドのお知らせ - SoftEther VPN プロジェクト」に対応するために、RaspberryPiにインストールしていたSoftEtherをアップデートした

設定メモ

ダウンロードしたファイルをRaspberryPiにコピーしてソースを展開

┌─╼  pi@softether : [~]
└────╼ [ssh] $ mkdir softether
┌─╼  pi@softether : [~]
└────╼ [ssh] $ mv softether-vpnserver-v4.38-9760-rtm-2021.08.17-linux-arm_eabi-32bit.tar.gz ./softether
┌─╼  pi@softether : [~]
└────╼ [ssh] $ cd softether/
┌─╼  pi@softether : [~/softether]
└────╼ [ssh] $ tar xvf softether-vpnserver-v4.38-9760-rtm-2021.08.17-linux-arm_eabi-32bit.tar.gz
vpnserver/
vpnserver/Makefile
vpnserver/.install.sh
vpnserver/ReadMeFirst_License.txt
vpnserver/Authors.txt
vpnserver/ReadMeFirst_Important_Notices_ja.txt
vpnserver/ReadMeFirst_Important_Notices_en.txt
vpnserver/ReadMeFirst_Important_Notices_cn.txt
vpnserver/code/
vpnserver/code/vpnserver.a
vpnserver/code/vpncmd.a
vpnserver/lib/
vpnserver/lib/libcharset.a
vpnserver/lib/libcrypto.a
vpnserver/lib/libedit.a
vpnserver/lib/libiconv.a
vpnserver/lib/libncurses.a
vpnserver/lib/libssl.a
vpnserver/lib/libz.a
vpnserver/lib/License.txt
vpnserver/hamcore.se2

展開したソースをmakeする

┌─╼  pi@softether : [~/softether]
└────╼ [ssh] $ cd vpnserver/
┌─╼  pi@softether : [~/softether/vpnserver]
└────╼ [ssh] $ make
--------------------------------------------------------------------

SoftEther VPN Server (Ver 4.38, Build 9760, ARM EABI) for Linux Build Utility
Copyright (c) SoftEther Project at University of Tsukuba, Japan. All Rights Reserved.

--------------------------------------------------------------------


Copyright (c) all contributors on SoftEther VPN project in GitHub.
Copyright (c) Daiyuu Nobori, SoftEther Project at University of Tsukuba, and SoftEther Corporation.

Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
You may obtain a copy of the License at

    http://www.apache.org/licenses/LICENSE-2.0

Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and limitations under the License.


DISCLAIMER
==========

THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.

THIS SOFTWARE IS DEVELOPED IN JAPAN, AND DISTRIBUTED FROM JAPAN, UNDER JAPANESE LAWS. YOU MUST AGREE IN ADVANCE TO USE, COPY, MODIFY, MERGE, PUBLISH, DISTRIBUTE, SUBLICENSE, AND/OR SELL COPIES OF THIS SOFTWARE, THAT ANY JURIDICAL DISPUTES WHICH ARE CONCERNED TO THIS SOFTWARE OR ITS CONTENTS, AGAINST US (SOFTETHER PROJECT, SOFTETHER CORPORATION, DAIYUU NOBORI OR OTHER SUPPLIERS), OR ANY JURIDICAL DISPUTES AGAINST US WHICH ARE CAUSED BY ANY KIND OF USING, COPYING, MODIFYING, MERGING, PUBLISHING, DISTRIBUTING, SUBLICENSING, AND/OR SELLING COPIES OF THIS SOFTWARE SHALL BE REGARDED AS BE CONSTRUED AND CONTROLLED BY JAPANESE LAWS, AND YOU MUST FURTHER CONSENT TO EXCLUSIVE JURISDICTION AND VENUE IN THE COURTS SITTING IN TOKYO, JAPAN. YOU MUST WAIVE ALL DEFENSES OF LACK OF PERSONAL JURISDICTION AND FORUM NON CONVENIENS. PROCESS MAY BE SERVED ON EITHER PARTY IN THE MANNER AUTHORIZED BY APPLICABLE LAW OR COURT RULE.

USE ONLY IN JAPAN. DO NOT USE THIS SOFTWARE IN ANOTHER COUNTRY UNLESS YOU HAVE A CONFIRMATION THAT THIS SOFTWARE DOES NOT VIOLATE ANY CRIMINAL LAWS OR CIVIL RIGHTS IN THAT PARTICULAR COUNTRY. USING THIS SOFTWARE IN OTHER COUNTRIES IS COMPLETELY AT YOUR OWN RISK. THE SOFTETHER VPN PROJECT HAS DEVELOPED AND DISTRIBUTED THIS SOFTWARE TO COMPLY ONLY WITH THE JAPANESE LAWS AND EXISTING CIVIL RIGHTS INCLUDING PATENTS WHICH ARE SUBJECTS APPLY IN JAPAN. OTHER COUNTRIES' LAWS OR CIVIL RIGHTS ARE NONE OF OUR CONCERNS NOR RESPONSIBILITIES. WE HAVE NEVER INVESTIGATED ANY CRIMINAL REGULATIONS, CIVIL LAWS OR INTELLECTUAL PROPERTY RIGHTS INCLUDING PATENTS IN ANY OF OTHER 200+ COUNTRIES AND TERRITORIES. BY NATURE, THERE ARE 200+ REGIONS IN THE WORLD, WITH DIFFERENT LAWS. IT IS IMPOSSIBLE TO VERIFY EVERY COUNTRIES' LAWS, REGULATIONS AND CIVIL RIGHTS TO MAKE THE SOFTWARE COMPLY WITH ALL COUNTRIES' LAWS BY THE PROJECT. EVEN IF YOU WILL BE SUED BY A PRIVATE ENTITY OR BE DAMAGED BY A PUBLIC SERVANT IN YOUR COUNTRY, THE DEVELOPERS OF THIS SOFTWARE WILL NEVER BE LIABLE TO RECOVER OR COMPENSATE SUCH DAMAGES, CRIMINAL OR CIVIL
RESPONSIBILITIES. NOTE THAT THIS LINE IS NOT LICENSE RESTRICTION BUT JUST A STATEMENT FOR WARNING AND DISCLAIMER.

READ AND UNDERSTAND THE 'src/WARNING.TXT' FILE BEFORE USING THIS SOFTWARE. SOME SOFTWARE PROGRAMS FROM THIRD PARTIES ARE INCLUDED ON THIS SOFTWARE WITH LICENSE CONDITIONS WHICH ARE DESCRIBED ON THE 'src/THIRD_PARTY.TXT' FILE.


--------------------------------------------------------------------


make[1]: Entering directory '/home/pi/softether/vpnserver'
Preparing SoftEther VPN Server...
ranlib lib/libcharset.a
ranlib lib/libcrypto.a
ranlib lib/libedit.a
ranlib lib/libiconv.a
ranlib lib/libncurses.a
ranlib lib/libssl.a
ranlib lib/libz.a
ranlib code/vpnserver.a
gcc code/vpnserver.a -fPIE -O2 -fsigned-char -pthread -lm -lrt -Wl,--no-warn-mismatch -lpthread -L./ lib/libssl.a lib/libcrypto.a lib/libiconv.a lib/libcharset.a lib/libedit.a lib/libncurses.a lib/libz.a -ldl -o vpnserver
ranlib code/vpncmd.a
gcc code/vpncmd.a -fPIE -O2 -fsigned-char -pthread -lm -lrt -Wl,--no-warn-mismatch -lpthread -L./ lib/libssl.a lib/libcrypto.a lib/libiconv.a lib/libcharset.a lib/libedit.a lib/libncurses.a lib/libz.a -ldl -o vpncmd
./vpncmd /tool /cmd:Check
vpncmd command - SoftEther VPN Command Line Management Utility
SoftEther VPN Command Line Management Utility (vpncmd command)
Version 4.38 Build 9760   (English)
Compiled 2021/08/17 22:32:49 by buildsan at crosswin
Copyright (c) SoftEther VPN Project. All Rights Reserved.

VPN Tools has been launched. By inputting HELP, you can view a list of the commands that can be used.

VPN Tools>Check
Check command - Check whether SoftEther VPN Operation is Possible
---------------------------------------------------
SoftEther VPN Operation Environment Check Tool

Copyright (c) SoftEther VPN Project.
All Rights Reserved.

If this operation environment check tool is run on a system and that system passes, it is most likely that SoftEther VPN software can operate on that system. This check may take a while. Please wait...

Checking 'Kernel System'... 
              Pass
Checking 'Memory Operation System'... 
              Pass
Checking 'ANSI / Unicode string processing system'... 
              Pass
Checking 'File system'... 
              Pass
Checking 'Thread processing system'... 
              Pass
Checking 'Network system'... 
              Pass

All checks passed. It is most likely that SoftEther VPN Server / Bridge can operate normally on this system.

The command completed successfully.


--------------------------------------------------------------------
The preparation of SoftEther VPN Server is completed !


*** How to switch the display language of the SoftEther VPN Server Service ***
SoftEther VPN Server supports the following languages:
  - Japanese
  - English
  - Simplified Chinese

You can choose your prefered language of SoftEther VPN Server at any time.
To switch the current language, open and edit the 'lang.config' file.


Note: the administrative password is not set on the VPN Server. Please set your own administrative password as soon as possible by vpncmd or the GUI manager.


*** How to start the SoftEther VPN Server Service ***

Please execute './vpnserver start' to run the SoftEther VPN Server Background Service.
And please execute './vpncmd' to run the SoftEther VPN Command-Line Utility to configure SoftEther VPN Server.

Of course, you can use the VPN Server Manager GUI Application for Windows / Mac OS X on the other Windows / Mac OS X computers in order to configure the SoftEther VPN Server remotely.

*** For Windows users ***
You can download the SoftEther VPN Server Manager for Windows
from the http://www.softether-download.com/ web site.
This manager application helps you to completely and easily manage the VPN server services running in remote hosts.


*** For Mac OS X users ***
In April 2016 we released the SoftEther VPN Server Manager for Mac OS X.
You can download it from the http://www.softether-download.com/ web site.
VPN Server Manager for Mac OS X works perfectly as same as the traditional Windows versions. It helps you to completely and easily manage the VPN server services running in remote hosts.



*** PacketiX VPN Server HTML5 Web Administration Console (NEW) ***
This VPN Server / Bridge has the built-in HTML5 Web Administration Console.

After you start the server daemon, you can open the HTML5 Web Administration Console is available at

https://127.0.0.1:5555/
or
https://ip_address_of_the_vpn_server:5555/

This HTML5 page is obviously under construction, and your HTML5 development contribution is very appreciated.

--------------------------------------------------------------------

make[1]: Leaving directory '/home/pi/softether/vpnserver'

既存のファイルと置き換える

┌─╼  pi@softether : [~/softether/vpnserver]
└────╼ [ssh] $ sudo cp -rf ./* /usr/local/vpnserver/

更新されたか確認する

┌─╼  pi@softether : [~/softether/vpnserver]
└────╼ [ssh] $ /usr/local/vpnserver/vpncmd /help
vpncmd command - SoftEther VPN Command Line Management Utility
SoftEther VPN Command Line Management Utility (vpncmd command)
Version 4.38 Build 9760   (English)
Compiled 2021/08/17 22:32:49 by buildsan at crosswin
Copyright (c) SoftEther VPN Project. All Rights Reserved.

Help for command "vpncmd"

Purpose:
  SoftEther VPN Command Line Management Utility

Description:
  The 'vpncmd' program is a utility that allows you to manage SoftEther VPN software by using command lines. By using vpncmd, you can
  connect to a VPN Client, a VPN Server or VPN Bridge that is running on a local or remote computer and manage these services. Moreover,
  by using VPN Tools mode, you can call the Network Traffic Speed Test Tool and the certificate creation function. These can be used even
  when not connected to the VPN Server or VPN Client.
  When using vpncmd, if the file name is specified by using the /IN and /OUT parameter, the command can be executed in a batch according
  to a file in which the executable commands are enumerated and the execution results can be written to a file. Normally a command prompt
  will appear after vpncmd is launched but when an input file is specified by the /IN parameter, the program will automatically terminate
  after the execution of all lines in the input file is complete. Also, when a command to execute is specified by the /CMD parameter, the
  program will automatically terminate after the execution of that command is complete. You cannot specify the /IN parameter and the /CMD
  parameter at the same time. The termination code of the vpncmd program will be the error code of the last executed command (0 in the
  case of successful execution).
  Under a Windows environment, when vpncmd is launched once or more by a user with administrator privileges, it is possible to simply
  input 'vpncmd' to a Windows command prompt or [Run...] window to launch vpncmd. To achieve the same result under a UNIX system, you can
  manually set, as appropriate, the PATH environment variable.

Usage:
  vpncmd [host:port] [/CLIENT|/SERVER|/TOOLS] [/HUB:hub] [/ADMINHUB:adminhub] [/PASSWORD:password] [/IN:infile] [/OUT:outfile] [/CMD
  commands...]

Parameters:
  host:port    - By specifying parameters in the format "host name:port number", a connection will automatically be made to that host. If
                 this is not specified, a prompt will appear to input the connection destination. When connecting to a VPN Client, you
                 cannot specify a port number.
  /CLIENT      - This will connect to VPN Client to do management. You cannot specify it together with /SERVER.
  /SERVER      - This will connect to VPN Server or VPN Bridge to do management. You cannot specify it together with /CLIENT.
  /TOOLS       - This will enables use of VPN Tools commands. VPN Tools include the simple certificate creation tool (MakeCert command)
                 and the Network Traffic Speed Test Tool (SpeedTest command).
  /HUB         - When connecting to the VPN Server by "Virtual Hub Admin Mode", this specifies the Virtual Hub name 'hub'. If you specify
                 the host name but not the /HUB parameter, connection will be by "Server Admin Mode".
  /ADMINHUB    - This will specify the name of the Virtual Hub 'adminhub' that is automatically selected after connecting to the VPN
                 Server. If the /HUB parameter was specified, the Virtual Hub will be selected automatically and this specification will
                 not be necessary.
   /PASSWORD    - If the administrator password is required when connecting, specify the password 'password'. When the password is not
                 specified, a prompt to input the password will be displayed.
  /IN          - This will specify the text file 'infile' that contains the list of commands that are automatically executed after the
                 connection is completed. If the /IN parameter is specified, the vpncmd program will terminate automatically after the
                 execution of all commands in the file are finished. If the file contains multiple-byte characters, the encoding must be
                 Unicode (UTF-8). This cannot be specified together with /CMD (if /CMD is specified, /IN will be ignored).
  /OUT         - You can specify the text file 'outfile' to write all strings such as onscreen prompts, message, error and execution
                 results. Note that if the specified file already exists, the contents of the existing file will be overwritten. Output
                 strings will be recorded using Unicode (UTF-8) encoding.
  /CMD         - If the optional command 'commands...' is included after /CMD, that command will be executed after the connection is
                 complete and the vpncmd program will terminate after that. This cannot be specified together with /IN (if specified
                 together with /IN, /IN will be ignored). Specify the /CMD parameter after all other vpncmd parameters.
  /CSV         - You can specify this option to enable CSV outputs. Results of each command will be printed in the CSV format. It is
                 useful for processing the results by other programs.
  /PROGRAMMING - There is no description for this parameter.

戻る

竹内電設は、大阪府下を中心に中小規模の組織がITシステムを効果的に活用するための、お手伝いをさせていただいております

設定メモ

最新版をダウンロード

ダウンロードしたファイルをRaspberryPiにコピーしてソースを展開

展開したソースをmakeする

既存のファイルと置き換える

更新されたか確認する